Thursday, January 27, 2011
RRP Racing Water Pump Pulley is developed and designed for changing the rev rate of pulley with reducing the burden of water pump. Also with reducing the rev reflection in high rev and controlling the flow speed of coolant, this product helps the cooling of radiator. Furthermore, using the duralumin material, the total weight of pulley will be lighten than the stock pulley. This affects to reduce the reflection resistance and will be able to obtain the response of acceleration and prevent from the overheating.
30% lighter than a stock water pulley !!
Stock water pump pulley (steel made) weight : 350gRRP Racing Water Pump Pulley (duralumin made) weight : 250g
RRP Racing Water Pump Pulley is used the duralumin as a material. This is very light weight like aluminum but the strength is as much as steel adopted with an airplane. We have chosen this expensive high quality material for the water pulley.
Price
E-312 RRP Racing Water Pump Pulley 14,700JPY
Fit : ZC11, ZC21 and ZC31 Swift Sport
(Please check the pulley belt size for ZC11 and ZC21. Only fit to 5PK belt size
|
Thursday, October 28, 2010
Thursday, September 23, 2010
R's Racing Supercharged Swift had a new upgrade on the Fuel Rail.
The new fuel rail will make sure enough supply of fuel for the engine.
Hmm... when can I own a Rotrex supercharger kit too???
Monday, July 19, 2010
From R's Racing Earl's blog regarding R's Racing and Top Fuel Swift on Track day.
Monday, June 21, 2010
Friday, June 18, 2010
Friday, June 4, 2010
What we are after is the reduction of valve spring burden and targeting the best feeling for an engine response. By adopting RRP Inner Shim, there will be less trouble of falls of inner shims in high rev.
E-107 : RRP Light Weight Valve Lifter Kit (with Inner shims) | 31,500 JPY |
E-108 : RRP Valve Inner shim 1pc (Size : 2.10 to 2.60mm stepping up 0.02mm each) Please specify the size when ordering. Fit : ZC11, ZC21 and ZC31 | 850 JPY |
RRP Super Metal Gasket for Cylinder head is designed and developed to resist severe levels of heat that are adopted the special coating with high durability and perfect seal performance. We have 2 different gaskets which the thickness is 0.4mm and 1.2mm for you. The thickness of 12mm is for the charged engine like Turbo or Supercharger kit. Please exchanging the stock gasket to RRP Super Metal Head Gasket makes pressure ratio up simply and adjustment of boost rate. Both RRP Gasket corresponds to normal stock engine too.
| Compression Ratio : | 11.1 (stock ZC31) | 11.4 (RRP Gasket) |
| Compression Ratio : | 11.1 (stock ZC31) | 10.6 (RRP Gasket) |
| 9.5 (stock ZC21) | 8.9 (RRP Gasket) | |
| 9.5 (stock ZC11) | 8.8 (RRP Gasket) |
E-109 : RRP Super Metal Gasket for Cylinder head 0.4mm 19,950 JPY
E-117 : RRP Super Metal Gasket for Cylinder head 1.2mm 28,350 JPY
Fit : ZC11, ZC21 and ZC31 of all year type
(Note : RRP Super Metal Gasket for Cylinder head is not designed to cure sealing problem caused by head or block irregularities.)
Saturday, April 24, 2010
Rotrex Supercharger Swift from R's Racing Earl's blog.
Open pod with long ram piping.
Monday, December 28, 2009
New product from R's Racing - Adjustable Stabilizer Kit
"We have designed and developed the stabilizer using the stock original stabilizer with non necessary to change to other manufacture's stabilizer for sport driving to prevent a roll of car. The cornering ability will be performed better and in safe with RRP Adjustable Stabilizer Kit.
You can adjust with delicate fine tuning so you will be able to set the performance with different circumstances. The basic adjustments are 3 steps which are normal, 15% up and 25% up effect.
Furthermore, you can change the proper position of stabilizer because the rod is also adjustable. You can enjoy the driving with small cost !!"
